The 8th International Symposium on Design, Operation, and Control of Chemical Processes, January 13-16, 2019, Chulalongkorn University, Bangkok, Thailand
Menu

The 8th International Symposium on Design, Operation, and Control of Chemical Processes

January 13-16, 2019
Chulalongkorn University, Bangkok, Thailand
**Enter your e-mail address :    
** Name in red color indicates that the registration is completed, but the payment has not been made.

Current Registered Participants

Participation Only
1.Naoki KimuraParticipation OnlyKyushu University
2.Takashi HamaguchiParticipation OnlyNagoya Institute of Technology
3.Sanghong KimParticipation OnlyKyoto University
4.Masahiko HiraoParticipation OnlyThe University of Tokyo
5.Jong Min LeeParticipation OnlySeoul National University
6.Jungkuk LeeParticipation OnlyDEPARTMENT OF MATERIALS SCIENCE AND ENGINEERING, CHUNGNAM NATIONAL UNIVERSITY
7.Yoshifumi TsugeParticipation OnlyKyushu University
8.Li-Ru HsuParticipation OnlyNational Chung Hsing University
9.Yi-Wen WangParticipation OnlyNational Chung Hsing University
10.Yeonju ShinParticipation OnlyINHA University
11.Yeonpyeong JoParticipation OnlyInha University
12.Thi Hong Hanh VoParticipation OnlyDepartment of Energy and Chemical Engineering, Incheon National University, Republic of Korea
13.Jiyong KimParticipation OnlyIncheon National University
Total registrants under this category : 13
The 8th International Symposium on Design, Operation, and Control of Chemical Processes
1.San-Jang Wang Design of Non-Phosgene Dimethylhexane-1,6-dicarbamate Synthesis Process Using Dimethyl CarbonateCenter for Energy and Environmental Research, National Tsing Hua University
2.Yu-Ting Chen Design of Non-Phosgene Dimethylhexane-1,6-dicarbamate Synthesis Process Using Dimethyl CarbonateDepartment of Chemical Engineering, National Tsing Hua University
3.En-Ko Lee Design of Non-Phosgene Dimethylhexane-1,6-dicarbamate Synthesis Process Using Dimethyl CarbonateCenter for Energy and Environmental Research, National Tsing Hua University
4.Cheng-Liang Chen Modeling and Analysis of Steam Pipe NetworksNational Taiwan University
5.Hsiang-Hsuan Cheng Dynamics and control of the steam utility supply system in a refineryNational Taiwan University
6.Iftekhar KarimiLEAPS2: Learning based Evolutionary Assistive Paradigm for Surrogate SelectionNational University of Singapore
7.Dinesh Krishnamoorthy A feedback real-time optimization strategy applied to an evaporator processNorwegian University of Science and Technology
8.Nik Nor Liyana Nik Ibrahim Analysis and Design of Nonlinear Non-isothermal Continuous Stirred Tank Reactor System Using Output Frequency Response FunctionUNIVERSITI PUTRA MALAYSIA
9.Shota Kato Model predictive control of Czochralski process producing 300 mm single crystal silicon ingotKyoto University
10.Shinji Hasebe Model predictive control of Czochralski process producing 300 mm single crystal silicon ingotKyoto University
11.Manabu Kano Variable Importance Based on Gaussian Process Regression Model and Its Application to Steelmaking ProcessDepartment of Systems Science, Kyoto University
12.Yoshiaki Suzuki Machine combination adjustment in multi-process production system for improving product yieldKyoto University
13.Xinmin Zhang Lognormal and Gamma mixed negative binomial modeling for predicting the number of defects in steel productsDepartment of Systems Science, Kyoto University, Kyoto 606-8501, Japan
14.Muhammad Abdul QyyumEnergy saving opportunities in Liquefaction processes for offshore LNG productionYeungnam University
15.Li Xuan Ren Hybrid Membrane Process for Post-combustion CO2 Capture from Coal-fired Power PlantsNational Taiwan University
16.Rungroj Yadbantung Nonlinear Model Predictive Control of Chemical Reactors with Uncertain Economic CostsDepartment of Chemical Engineering, Mahidol University
17.Kazuhiro Takeda Evaluating normal operation in the transient state of a fuel supply systemShizuoka University
18.Yusuke Hayashi Computer-aided design of freeze-thaw processes of induced pluripotent stem cellsThe University of Tokyo
19.Hsun-Wei Huang Minimum Energy Estimation for Reactive Distillation Column via Underwood Shortcut MethodNational Taiwan University of Science and Technology
20.Hao-Yeh Lee The Improvement Design of Reactor for Styrene-acrylonitrile Copolymers ProcessDepartment of Chemical Engineering, National Taiwan University of Science and Technology
21.Ms. Jarukamol DawkrajaiForecasting any Black Box Time-Series Process with Box-Jenkins, Neural Networks and Modified Finite Difference ModelsChemical Engineering Department, Chulalorngorn University
22.Kinza QadeerEnergy efficient retrofitting of dual mixed refrigerant natural gas liquefaction processYeungnam University
23.Chia Xin Low Induction Approach via P-graph to Rank Clean TechnologiesChemical Engineering Department, Universiti Teknologi Petronas
24.Kanokorn Chooplod Development of novel-based thermoelectric generator with automatic control for electricity generation at specific conditionsChulalongkorn University
25.Weng Yan Ng Ranking Negative Emission Technologies Under UncertaintyChemical Engineering Department, Universiti Teknologi Petronas
26.Yu-Han LoGaussian process regression-based "small data" integration for process modelingNational Tsing Hua University
27.Raluca SuciuExergy-based method for determining heat pricingÉcole Polytechnique Fédérale de Lausanne
28.Kritsanawat Pholprasan Multiplicity and control of reactive distillation for biodiesel productionSilpakorn University
29.Jui-Yuan Lee Automated Targeting for Batch Heat IntegrationNational Taipei University of Technology
30.Wei-Chen Chang Comparisons of a class of IGCC plants integrated with calcium/chemical looping cyclesNational Cheng Kung University
31.Michael GeorgiadisScheduling Techniques for the Food Process IndustriesAristotle University of Thessaloniki
32.KuangLei WangAn Optimization Framework of Integration Design and Control for Polymerization Processes with Uncertainties Using Gaussian Mixing ModelsZhejiang University
33.Frederik Schulze SpüntrupOn KPIs for efficient asset fleet managementNorwegian University of Science and Technology
34.Woranunt Lao-Atiman Modeling and Simulation of Zinc-Air Flow Battery Integrated with Zinc ElectrolyzerChulalongkorn University
35.Natthaporn Saithong Optimization and exergy analysis of the combined sorption-enhanced chemical looping reforming and water splitting process for hydrogen productionComputational Process Engineering Research Unit, Chulalongkorn University
36.Chika Kawahara Heat Exchanger Network Design Support System for Retrofit of Existing Plant using Strategy Switching MechanismKyushu University
37.Hironobu Kase Fault Detection for Chemical Processes using Negative Selection AlgorithmKyushu University
38.Cheng-Hung Chou Development of Nonparametric Dynamic Model with Generalization Capability Using Deep LearningDepartment of Chemical Engineering, National Tsing Hua University
39.Yukio Matsuyama Investigation of the effect of utilizing the process knowledge for sample selection in soft-sensor designKyoto University
40.Hongbum ChoiModeling and Simulation of a Pre-Reformer (PR) and a Membrane Reactor (MR) reflecting CFD resultsKorea Advanced Institute of Science and Technology
41.Seongbin Ga Isotherm Model for S-shaped Data for Process Modeling and its Model Reduction with Machine Learning TechniquesKorea Advanced Institute of Science and Technology
42.Dahee Yun Development of Anammox Control Factor and Operation Technology for Treated Water TreatmentYeungnam University
43.Solji Choi Equipment valve sizing model analysis based on Dynamic simulationSeoul National University
44.Apoorva Katragadda Operational and supply chain strategies for cell therapy manufacturingNational University of Singapore
45.Yasunori Kikuchi Simulation-based design of indoor hydroponic farming systems considering energy-water-food nexusIntegrated Research System for Sustainability Science, the University of Tokyo
46.Jyh-Cheng Jeng Design and Analysis of Stand-Alone Reverse Osmosis Desalination Systems Powered by Pressure Retarded OsmosisNational Taipei University of Technology
47.Munawar Abdul ShaikMinimization of water usage in batch scheduling via sequential and simultaneous techniquesIndian Institute of Technology (IIT) Delhi
48.ROHIT OMARIntegrated Scheduling and Maintenance with Inventory Control for Continuous PlantsIndian Institute of Technology (IIT) Delhi
49.Junqing Xia Physical-Principle Based Extension of Attributes for Process MonitoringDepartment of Chemical Engineering, Tokyo University of Agriculture and Technology
50.Min Jun Song Fault Detection of Bioreactor System Using Principal Component AnalysisSeoul National University
51.Kuang-Yi Chu Time Series Neural Network Application to Fault Diagnosis in Chemical ProcessesTamkang University
52.Cheng-Hung Chou Machine Learning of Molecular Classifications and Quantum Mechanical CalculationsNational Tsing Hua University
53.Tossaporn Jirabovornwisut Dynamic optimization of electrolyte flow rate for improving the system efficiency of vanadium redox flow batteriesDepartment of Chemical Engineering, Faculty of Engineering, Chulalongkorn University
54.Hairul HudaPerformance Heat Exchanger Networks for Various Decrease in Overall Heat Transfer CoefficientInstitut Teknologi Sepuluh Nopember
55.Renanto HandogoPerformance Heat Exchanger Networks for Various Decrease in Overall Heat Transfer CoefficientInstitut Teknologi Sepuluh Nopember
56.Jaejung Urm Neural Network-Based Surrogate Model for Chemical Process Optimization Seoul National University
57.Kensaku MatsunamiHolistic and model-based design of oral drug manufacturing processes considering uncertainty in clinical developmentThe University of Tokyo
58.Timothy WalmsleyThe Challenge of Heat Pump Integration with Drying Processes Achieving Zero External Utility HeatingBrno University of Technology
59.Warunee ChankerdStudy of Bunsen reaction in plug flow reactor for the sulfur-iodine thermochemical processChulalongkorn University
60.Yuichiro Kanematsu Environmental analysis of acetylation of cellulose nanofibers through process system simulationThe University of Tokyo
61.Sirikanya Singcuna Optimization of Degassing Silo Unit in LDPE Production ProcessChulalongkorn University
62.Weerawun Weerachaipichasgul Energy Evaluation of Extractive Distillation Process for the Methylal and Methanol Mixture with Glycol Mixture as EntrainerNaresuan University
63.Masahiro YamadaModel-based determination of lot-size in pharmaceutical injectable manufacturingThe University of Tokyo
64.Li-Ru HsuReinforcement learning control strategy development on eliminating the effect of external disturbances in model-free systemsNational Chung Hsing University
65.Yiwen WangSystematic Design Strategy for Developing Optimal Water Network under Process UncertaintyNational Chung Hsing University
66.Pengcheng Lu A Robust Integrated Economic Optimization for Batch Processes Using Disturbances-Based Dual-Feedback ControlZhejiang University
67.Chanthawit Anuntasethakul Design of Integrated Real-time Optimization and PI Control for Building Temperature Control SystemChulalongkorn University
68.Md Tanvir SowgathStudy of Production Performance and Safety Analysis of Ammonia Fertiliser Process within Aspen PlusBangladesh University of Engineering and Technology
69.Zulfan Adi Putra Process System Engineering Approach for Maximizing Oil Production in An Integrated Subsurface and Surface FacilityUTP
70.Lanyu Li A Multi-criteria Stochastic Optimisation Approach for the Design and Integration of Food Waste Valorisation ProcessNational University of Singapore
71.Ali AlmansooriDesign of a detailed charging station network for Abu Dhabi City using mixed integer programming optimizationThe Petroleum Institute, Khalifa University of Science & Technology
72.Wenxin Wang Application Of Robust-IC Intelligent Control System For Plant-Wide Production Processes On Ethylene PlantBeijing Century Robust Technology Co.,Ltd.
73.Xigang YuanNumerical simulation of interfacial mass transfer with Rayleigh convection in evaporation process and mass transfer coefficient modelTianjin University
74.Alexander Guzman-UrbinaData science for sustainable process engineering: "FIEMA-CO", a hybrid system of Fuzzy Inference and Emissions Analytics for Catalyst OptimizationTohoku University
75.Rofice Dickson Optimal design of macroalgae-based biorefinery with potential zero direct greenhouses gas emission: Economic and environmental prospectivePukyong National University
76.Sunghyun Cho Research on Optimal Safe Operating Condition of Fluidized Bed Incinerator Used for Waste Explosive TreatmentYonsei University
77.Xin Wan Boundary operation based on control redundancy for zone target model predictive controlChina University of Petroleum Beijing
78.Danlei Chen Synthesis of Refrigeration System with Continuous Optimization Problem based on Generalized Disjunctive ProgrammingSchool of Chemical Engineering and Technology, Tianjin University
79.Yoshiyuki Yamashita A Hybrid Monitoring Method for a Heat Exchanger FoulingTokyo University of Agriculture and Technology
80.Yuyang Kang Equation-Oriented Flowsheet Simulation and Optimization of Extraction Column Using Pseudo-Transient ModelsSchool of Chemical Engineering and Technology, Tianjin University
81.Fu-Ming Xie A fast and efficient estimation method for catalysis activity of acetylene hydrogenation reactorChina University of Petroleum Beijing
82.Linlin Liu Simultaneous synthesis of heat exchanger network and utility system considering inter-stage and inner-stage heatersInstitute of Chemical Process Systems Engineering, Dalian University of Technology
83.Jaewon Lee A Study of Natural and Forced Nitrogen Ventilation to Mitigate Gas Leaks in an Enclosure used in the Supply of Hydrogen to a Residential AreaYonsei University
84.Yu Zhuang The Correct Integration of Compressors into Sub and Above-ambient Heat Exchanger NetworksSchool of Chemical Engineering, Dalian University of Technology
85.Naoki Yokokawa Systematic methodology for designing multi-functional products for sustainability by connecting design variables with product functionsThe University of Tokyo
86.Jian Du Improved multi-objective optimization for designing the cost-effective and highly controllable heat exchanger networkInstitute of Chemical Process Systems Engineering, School of Chemical Engineering, Dalian University of Technology
87.Xi Wang Optimization of distillation sequence with non-sharp separation columnBeijing University of Chemical Technology
88.Fangyuan Ma PCA-based process monitoring with limited historical dataBeijing University of Chemical Technology
89.Wei Sun PCA-based process monitoring with limited historical dataBeijing University of Chemical Technology
90.Takuya Wada Causal Inference of Nonlinear Systems Using Gaussian Process Regression and Hilbert Schmidt Independence CriterionKyoto University
91.Hongzhe Hou Optimization of Complex Distillation Column Systems Using Pseudo-Transient Continuation (PTC) ModelChemical Engineering Research Center, School of Chemical Engineering and Technology, Tianjin University
92.Yiqing Luo Optimization of Complex Distillation Column Systems Using Pseudo-Transient Continuation (PTC) ModelChemical Engineering Research Center, School of Chemical Engineering and Technology, Tianjin University
93.Mikiaki Hasegawa Lifecycle assessment-based material selection for sustainable automotive designThe University of Tokyo
94.Qingrong Shen Impact factor analysis for the temperature changes in Asian citiesBeijing University of Chemical Technology
95.Souta Sato An application of STAMP for safety and cyber security of ICSNagoya Institute of Technology
96.Orakotch PadungwatanarojEfficient and reliable computer aided tools for product-process simulation, optimization and analysisPSE for SPEED Company Limited
97.Yodsathorn ChavewanmasLCSoft – systematic and consistent Life Cycle Assessment softwarePSE for SPEED Company Limited
98.Patsuda Chiraroumsaeng Optimal Reactive Distillation Continuous Process of Glycerol Acetylation with Hexane as an entrainerDepartment of Chemical Engineering, Faculty of Engineering, Chulalongkorn University, Bangkok, 10330, Thailand.
99.SOON-KU HONGEpitaxial Growth and Properties of Gallium Oxide Films for Power Semiconductor ApplicationsDEPARTMENT OF MATERIALS SCIENCE AND ENGINEERING, CHUNGNAM NATIONAL UNIVERSITY
100.Thai Ngan DoNew solar energy-based methanol production process via direct CO2 hydrogenationDepartment of Energy and Chemical Engineering, Incheon National University, Incheon 406-772, Republic of Korea
Total registrants under this category : 100
Total 113 participants(s)